Electric Guitar

Recording Electric Guitar in an Audio House studio is easy. We’ll give you more detail below, but in summary there are five steps.

1 - open the DAW

2 - load the premade template

3 - connect your guitar

4 - record

5 - save and share it :)

Open the DAW

Open the DAW by double-clicking the large green, brown, and blue icon titled “Make Music”.

DAW is just the nickname for the program we use to record music on a computer. It stands for Digital Audio Workstation.

Load the premade template

By default, a generic template for recording vocals over a pre-made instrumental is automatically loaded. If you will also be recording vocals and inserting pre-made instrumentals, you may keep these tracks. If not, go ahead and delete them before loading the electric guitar template.

To load the electric guitar template…

1. Right click the “Track Panel”

2. Hover over “Insert track from template…”

3. Hover over “Guitar”

4. Finally, select the Electric Guitar template you’d like to use.

Connect your guitar

The 1/4” instrument cable for your guitar is coiled underneath the keyboard. This cable is already connected to high-end pre-amps and is ready to be plugged straight into your guitar.

Simply grab the cable and connect it to your guitar input.

(Please recoil the cable when you are finished 👍)

Record

When you’re ready to record, follow these steps…

1. Press the large red button to start recording. There will be a delay to give you time to stand up and move to the microphone.
   (CTRL + R also starts recording)

2. Press SPACE BAR when you’d like to stop recording

3. Press SPACE BAR again to listen to what you’ve recorded

4. If you want to delete it, right click the waveform that you recorded and click “Remove Items”.
   (Or left click on the waveform and click “Delete” on the keyboard)

5. Repeat this process until you’ve finished the song.

Save and share

Don’t lose your work! Save your project as often as you remember by pressing CTRL + S on the keyboard. When it’s your first time saving you will need to select a location for your file.

To create a location for your file…

1. Press “File”, then “Save”

2. Create a new artist folder with your name (if it doesn’t already exist)

3. Type the song name in the “File Name” box

4. Ensure that the following 3 boxes are checked:

   1. “Create subdirectory for project”

   2. “Move all media into project directory”

   3. “Copy rather than move source media if not in old project media path”

5. Press Save

When you’re finished with the song and would like to render an MP3 or WAV for listening or sharing…

1. Click “File” in the top left corner

2. Press “Render”

3. On the window that appears, click “Browse”

4. Select the selected file directory which will appear under “Browse for file”

5. Change the “File Name” to something memorable

6. Select the file type you’d like.
   WAV = best quality, large file size
   MP3 = worst quality, small file size

7. Click “Render”